View Full Version : Problems with 6EXH throttle not working on heli's in G3.5
Druff1
11-19-2006, 05:18 PM
Anyone have any problems with their tx not working on heli's? Actually the only thing that doesn't work is the throttle. I've done everything i can think of to try and get it to work. It works fine on airplanes.
Any idea's?
zooland1
11-21-2006, 02:53 PM
Make sure you have your radio set to airplane or mechanical mix heli (either SW1 or H-1 on the EXH, can't remember). I have trouble programming the 6EXH with a real heli, let alone the sim.
vitek
11-22-2006, 03:07 AM
RealFlight G3 uses channel 8 to control the governor RPM input. Since you use a 6 channel radio, you will probably have issues with this. You can edit the models to not use channel 8 for this, you can use the interlink controller, or you could map channel 5 to the 3 position switch in the mapping dialog [requires G3.5]
Travis