HS-81 are these ok to run on a logo 10 no 3d for AP?

[Cryofix]

Just picked these up form my LHS on a whim and was wondering if they are ok to use on the Logo 10 for AP use?

4.8 36 Oz Torque
6.0 42 Oz

[askman]

for cyclic? I wouldnot use them . futaba 3150 is probably the cheapest I would use for logo 10 that is drop in. even hs85 is marginal for logo 10.

[Cryofix]

any other suggestions for servos, that are dencent? I picked up 3 3151's from ready heli before I bought the Logo and found out as soon as I opened the box for the logo they were not going to work.

[askman]

logoheli.com has a chart for the servo. I made a mistake on the above reply the cheapest one I would use is futaba 3102. 3150 is a digital version of 3102. JR386 is another decent servo, but cost more than 3150.

check out the 3102. they are aobut 35 each, and good for logo setup.

[AZ ChopperCam]

I use 3102's on my Logo 10 AP ship. Fly it on photo missions at least 2-3x a week for the past few months with no issues.

[Cryofix]

the LHS didnt have any 3102's or 3150's so I picked up 3 9650's, I also went to the right guy today at my LHS casue he just gave them to me $50 each with no tax!!!