should my 3g plugs be really loose in the reciver???

[mickshalldale@yahoo.com]

i have 3g for trex 500. i have spectrum 7 channed and when i plug in the 3g plugs to the spectrum reciver they are very loose and have a lot of moving play is this normal ???

also it says in the manual that when entering setup mode if the led flashes red then there was a prob??

no mater what when i start mine up it flashes green then red then green the red then enters the mode is this also normal ??

HELP PLEASE

and one more thing does ur servo arms have to be at 13.mm what if they r at 16mm like flybar version?? what will happen

[jeffreydc]

On my receiver its a pretty tight fit. I have used the ar7600 and ar6200 and they are pretty tight on both especially once they are all plugged in.

Im not sure how much of a difference the 13 to 16mm difference would be except for better resolution. Im sure it would fly but possibly make the unit work harder to make corrections. I did the same thing when setting mine up but caught it before flying and changed it so not sure how it would fly any different.

[mickshalldale@yahoo.com]

well the prob i having is on a spectrum 7 channel reciver the comection on he 3g are really loose and boddly ??? the align esc and other plugs are tight fit just not 3g.

and also it seems when i have my servo armst at 16mm everything moves very well no binding but i cant get the flybarless head at 0 pitch only i littler highter or lower.

but if i move to 13 mm then my links and ball links and my servo arm bind and actually hit the servo case at almost full travel. by this i mean the two front servos aileron and pitch servos.

so damm i am just all over the place with this thing an comments