leejax01
07-05-2010, 08:31 PM
Still having set up issues with my 8FGH and Align governor. Getting the red light and the gov is still active in Normal and governs down in Idle 1 & 2. Valus are normal INH rate off, Idle1 79% and idle 2 81%. Ch7 is reversed and the heli governs down when I go to idle up and it still governs in normal even though the red light is on.
Sicha
07-08-2010, 05:02 PM
Enter the servo monitor and look at the governor channel (mine is channel 7)
At normal mode, my gov channel is at zero, so that the gov disengages when I hit the switch.
My idle 1 is set according to the manual, something like +67, and idle 2, +71. I just adjusted the travel in channel 7 to get this numbers in the servo monitor, and everything started working perfectly.