2 in 1 mixer esc?

[bullaculla]

EFLH1039 2 in 1 mixer/ESC

Has anyone used this with the G90 gyro? I see everyone selling it, but have yet to read about someone using it.

I recently burned out my 3 in 1, and was going to order a new one along with the G90, but the 2 in 1 would make more sense if buying both at the same time... Right? :dontknow

thanks in advance.

[bullaculla]

BTW,
I have a BCP pro if it makes a dif...

[Pinecone]

Seems to me, but why not call Horizon and ask.

[Paul Hinz]

I tried to use a CSM 420 gyro with the 2 in 1 mixer and it did not like it. The 2 in 1 has revo mixing built into it and that just messed up the gyro when I tried to use heading hold.

Paul

[futura]

True, the 2in1 is also a mixer. You cant turn off the mixing and also can't have any mix/revo when using a HH gyro.

When used with a piezo gyro, the 2in1 works great.

[frankos72]

I'm using the 2 in 1 with the g90 on my BCP and It's great. I coudn't hook up the g90 to the BCP 4 in 1 so I went this rout with a cheapo 10 rx and I couldn't be happier.

I am having a problem where the heli doesn't fly right sooner in the batt than I would expect. It could be the ESC, but more likely the batt. I'll soon try a fresh batt right after this happens to see if its the batt or something else. I have a feeling the 2nd bat will fly just fine.

[bullaculla]

Sounds good. As long as some one says they have it and it works, I'll give it a try.
Thanks
:D

[RustyFingers]

I'm using a g90 with the bcpp stock 3n1. Better than stock but I don't know if i'd put another 100$ in this heli again.