Servo replacement?

[LITHIUMSTATIC]

I have about 800-900 flights on my blade CP servos. They seem to work ok other than all three start twitching from time to time. Rarely just one doing doing this but all three. Doesn't do it often. Should I replace them since they have tons of hours on them?

[carlo_the_wonder_frog]

Good idea, get some Hitec HS55 to replace them, more accurate servo.

[LITHIUMSTATIC]

You think it's better than the e-flight servos? Do they require any modifacations? They are ratted less torque than the E-flights.

[No_Gassers_Here]

no mod, better servo's
I put HS56 in my Blade CX over kill but worth it
It's just a toy but you can tell the dif.

[LITHIUMSTATIC]

Are the HS56 a direct drop in? How are they better if they are rated to have less torque?

[No_Gassers_Here]

better built no slop and yes direct drop in at lest for the BCX and it uses the same e-fight 75's as the CP

[LITHIUMSTATIC]

Will do! Thanks!!!!

Jeremy

[LITHIUMSTATIC]

I think I will try some HS-65 in it. See what happens. Butt loads of torque!!!

[No_Gassers_Here]

direct fit to just a little more way overkill for a BCX but just right for the CP. how is your 4 in 1 sotimes when they start to go they freak out the servos's Just a though...

[LITHIUMSTATIC]

It's got a new 3 in 1 on it. I use a JR RX. I really feel everything else is top notch working order.

[No_Gassers_Here]

wow are you runing a giro and if your are which one isit the e-flight g90 :?:

[LITHIUMSTATIC]

Yes I use a g90 gyro. Works great!!!! Flies sloppy with the stock one. It's not a very easy heli to fly compared to something like a Raptor or T-Rex 450 but with the improvements I done to mine it's not so bad. Looking into buying a new ERaptor620 soon. The fun will really begin then...

[Rebuild]

Just installed a G90 today and it works fantastic with my dual tail motors. One of the better upgrades to these little beasts along with a brushless main.