PDA

View Full Version : Can someone tell me the length of stock UFLY blades?


bassangler43
08-10-2010, 02:06 PM
The reason I ask... I just did a complete brushless upgrade for my CB180D and went with the exended blades from RTF-HELI. They have no name or part number on any. I happened to notice the UFLY blades are almost identical but I need the length to be sure that's what they are. What I'm using now is right at 9 inches long. I'm just looking for a cheaper alternative as opposed to the blades from RTF. Any help will be appreciated. Thanks!!!

Chris

ting
08-11-2010, 04:38 AM
The stock UFLYS balde is 240 mm (9 3/8 inches).

Ting.

bassangler43
08-11-2010, 04:59 AM
Ting,
Thanks for taking the time to respond.

Best Regards,
Chris

graffin639
01-02-2011, 12:24 PM
Hi
talking about blades...is there an option like the Airy Hardened Blades I got for my little Lama V4? they are unbreakable! and for the hard times I am having with this helicopter i need hard blades
thanks

magicmarty
02-24-2011, 04:29 AM
get some of the extreme fiberglass reinforced blades for the honey bee v2 they are the same size and are a lot stronger then the stock ufly blades...boomtownhobbies.com has them for $8.50 a set plus ship...a guy told me he has crashed into his car, house, and hit a wood rail road tie and didn't break the extreme blades ..in fact he said one of the blades was stuck in the wood and he had to pry it out......i have a set coming in a couple of days , i also just installed a set of the superblades xp on my uflys ..they seem better then the stock but i had to modify them to get them to fit between the blade grips..the mounting ring on them is near 4mm thick i had to shave it down to 2mm to fit the ufly blade grips...the extreme blades will fit without any modification to them...

arquitron
04-29-2011, 12:01 AM
The stock UFLYS balde is 240 mm (9 3/8 inches).

Ting.
And the blade root thickness? Thx

magicmarty
04-29-2011, 07:42 AM
the stock blade mounting ring at the root is 2mm ....