swift set up

[Matt]

getting a swift sometime next year i have this set up in mind.

ESC: CNE480 Century Electron 80A Brushless ESC

MOTOR: Century 600 Plus

BATTERY: Flight Power 4s1p 3700mah, Thunder Power 4s1p 3850mah, Emoli 6s-7s and maby Align 6s1p 4200mah(not sure on this one ill have to customize the pack into a 4cell and a 2cell because my triton only supports 4cells)

SERVO: Hitec HS-635HB

GYRO/SERVO: Futaba GY401/9254

PINION: 13T for 4s1p and 9T for 6s1p

As for the ESC im not sure it can handle 7s because centuryheli.com web site has no info on it. and also thinking of the CC85HV but to expensive for me.

thanks any advice is appreciated.

[broke-again]

I think the 600+ is suitable for either 4-5 or 6 cell lipo setups, i personally have not yet decided what motor i will be using. I will be using PolyQuest 4350mAH-4S lipos for power. As for servos, Finless favours digital for their centering speed, i will initially be using HS645MS as they have high torque and pretty good speed, besides i already have them. I wont be doing 3d, just basic flying.

I am also looking at using the Align 75a esc and Bec with step down regulator and the Align 600L motor appears to work well on 4s in Gov mode. But still not decided.

The only think i would look at is your servo choice, but that also depends on what type of flying you do, but IMHO you may be better using ones with a bit more torque. I was looking at the JR DS821, good specs & price and pretty well suited to the .30 size heli

[Matt]

have been looking at my local hobby shops web site and these are some of the servos i have picked out

futaba s3001
hitec HS-5475HB Digital Servo
hitec HS-635HB
HS-6635HB Digital Torque (This one looks good)

there all under $100 singapore i am currently living in singapore

heres the web site http://shop.rotor.com.sg