Gohbee News
12-13-2006, 11:24 AM
You asked for it you got it! New goodies from Gohbee!
You asked for a better tail rotor grip assembly with 3 ball bearings per blade grip and it is here right now. The new Super Duty Tail Rotor assembly has a thrust bearing sandwiched in between 2 radial ball bearings in each tail grip. The new tail grip assembly attaches to a new tail hub for a greater level of control, permitting smoother operation at higher tail rotor speeds and/or with bigger tail blades. This is a great addition to go with the aluminum tail speed up pulley. This new tail assembly will fit the Stinger 30/50/60/90. Of course, like many other Gohbee parts the new tail assembly will also work on all Raptors. This new tail may even be used to upgrade some other helies that use a 5mm tail shaft. Gohbee 50, 60 and 90 kits now include this nice new tail as standard. Kit includes bearings, tail rotor grips, tail rotor hub, shims & hardware.
P/N 50170, $31.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50170&Category_Code=0100)
The next new item is a bright shiny new all aluminum open tail case for the 30 & 50 size Stingers and Raptors. This new tail case is much stronger and more crash resistant than the plastic ones. It's a great kit at an exceptional value!
P/N 50171, $34.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50171&Category_Code=0100)
We've also got a new plastic canopy that has been restyled and is available for the Stinger or Raptor 60/90. The plastic canopy is able to withstand more abuse than a fiberglass canopy.
This new canopy comes with a large decal sheet or can be painted using normal practices for plastic canopies. The windshield area can be cut out for the transparent amber windscreen or left solid and painted. Coming soon will be a choice for new 60/90 kits to include either the new plastic canopy or the current fiberglass one.
P/N 10251, $26.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=10251&Category_Code=0100)
We have a new Carbon Tail servo mount that attaches to the frame using the two lower boom clamping screws. Available in Black Carbon or Silver Composite.
Black Carbon P/N 50134, $14.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50134&Category_Code=0100)
Silver Composite P/N 50133, $14.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50133&Category_Code=0100)
We now have available a Tail servo mount for the boom with aluminum rings and a Carbon mounting plate for the Stinger or Raptor 30/50 or any heli with a 22mm tail boom, and one to fit the Stinger or Raptor 60/90 or any heli with a 25mm tail boom.
30/50 Mount P/N 50126, $19.95 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50126&Category_Code=0100)
60/90 Mount P/N 50127, $19.95 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50127&Category_Code=0100)
And the final new item for now is the G10, 3D tail fins to fit the Stinger or Raptor 30 through 90 size machines. The new fins are available in Neon Yellow, Neon Green and Neon Orange or unpainted and prepped for your own original paint scheme.
Better yet the new G10 3D fins that are available for the 60/90 machines have elongated slots in order to fit on the 30/50 machines as well. For those who are running longer tail blades on their 30/50 size machine and want a longer vertical fin, you can now use the 60/90 fins as a straight bolt on!
30/50 U-paint, P/N 50150, $16.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50150&Category_Code=0100)
30/90 U-paint, P/N 50151, $18.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50151&Category_Code=0100)
30/50 Orange, P/N 50155, $27.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50155&Category_Code=0100)
30/90 Orange, P/N 50156, $29.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50156&Category_Code=0100)
30/50 Yellow, P/N 50160, $27.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50160&Category_Code=0100)
30/90 Yellow, P/N 50161, $29.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50161&Category_Code=0100)
30/50 Green, P/N 50165, $27.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50165&Category_Code=0100)
30/90 Green, P/N 50166, $29.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50166&Category_Code=0100)
We now stock solid steel replacement mainshafts for the Raptor 30/50 V2!
P/N GAK0029, $6.89 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=GAK0029&Category_Code=0100)
Coming soon, look for us to be stocking replacement spindles for the Raptor 30/50 V2.
P/N GPV0355, $4.89 USD
We're stocking these to help our Raptor customers. Now you'll be able to get more of what you need from the same place!
Stay tuned!! Coming to Gohbee in the near future, we will begin rolling out our line of electric powered helies!Be sure to keep an eye out for them!
Effective January 1, 2007 we will no longer be able to offer the 7% discount on orders using a field rep code. In place, we are excited to offer free ground shipping on orders totaling over $100 within the continental USA.
Thank you for your continued support over the last year and happy holidays from the staff at Gohbee!
Merry Christmas!
You asked for a better tail rotor grip assembly with 3 ball bearings per blade grip and it is here right now. The new Super Duty Tail Rotor assembly has a thrust bearing sandwiched in between 2 radial ball bearings in each tail grip. The new tail grip assembly attaches to a new tail hub for a greater level of control, permitting smoother operation at higher tail rotor speeds and/or with bigger tail blades. This is a great addition to go with the aluminum tail speed up pulley. This new tail assembly will fit the Stinger 30/50/60/90. Of course, like many other Gohbee parts the new tail assembly will also work on all Raptors. This new tail may even be used to upgrade some other helies that use a 5mm tail shaft. Gohbee 50, 60 and 90 kits now include this nice new tail as standard. Kit includes bearings, tail rotor grips, tail rotor hub, shims & hardware.
P/N 50170, $31.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50170&Category_Code=0100)
The next new item is a bright shiny new all aluminum open tail case for the 30 & 50 size Stingers and Raptors. This new tail case is much stronger and more crash resistant than the plastic ones. It's a great kit at an exceptional value!
P/N 50171, $34.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50171&Category_Code=0100)
We've also got a new plastic canopy that has been restyled and is available for the Stinger or Raptor 60/90. The plastic canopy is able to withstand more abuse than a fiberglass canopy.
This new canopy comes with a large decal sheet or can be painted using normal practices for plastic canopies. The windshield area can be cut out for the transparent amber windscreen or left solid and painted. Coming soon will be a choice for new 60/90 kits to include either the new plastic canopy or the current fiberglass one.
P/N 10251, $26.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=10251&Category_Code=0100)
We have a new Carbon Tail servo mount that attaches to the frame using the two lower boom clamping screws. Available in Black Carbon or Silver Composite.
Black Carbon P/N 50134, $14.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50134&Category_Code=0100)
Silver Composite P/N 50133, $14.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50133&Category_Code=0100)
We now have available a Tail servo mount for the boom with aluminum rings and a Carbon mounting plate for the Stinger or Raptor 30/50 or any heli with a 22mm tail boom, and one to fit the Stinger or Raptor 60/90 or any heli with a 25mm tail boom.
30/50 Mount P/N 50126, $19.95 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50126&Category_Code=0100)
60/90 Mount P/N 50127, $19.95 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50127&Category_Code=0100)
And the final new item for now is the G10, 3D tail fins to fit the Stinger or Raptor 30 through 90 size machines. The new fins are available in Neon Yellow, Neon Green and Neon Orange or unpainted and prepped for your own original paint scheme.
Better yet the new G10 3D fins that are available for the 60/90 machines have elongated slots in order to fit on the 30/50 machines as well. For those who are running longer tail blades on their 30/50 size machine and want a longer vertical fin, you can now use the 60/90 fins as a straight bolt on!
30/50 U-paint, P/N 50150, $16.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50150&Category_Code=0100)
30/90 U-paint, P/N 50151, $18.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50151&Category_Code=0100)
30/50 Orange, P/N 50155, $27.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50155&Category_Code=0100)
30/90 Orange, P/N 50156, $29.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50156&Category_Code=0100)
30/50 Yellow, P/N 50160, $27.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50160&Category_Code=0100)
30/90 Yellow, P/N 50161, $29.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50161&Category_Code=0100)
30/50 Green, P/N 50165, $27.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50165&Category_Code=0100)
30/90 Green, P/N 50166, $29.99 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=50166&Category_Code=0100)
We now stock solid steel replacement mainshafts for the Raptor 30/50 V2!
P/N GAK0029, $6.89 USD (http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=GAK0029&Category_Code=0100)
Coming soon, look for us to be stocking replacement spindles for the Raptor 30/50 V2.
P/N GPV0355, $4.89 USD
We're stocking these to help our Raptor customers. Now you'll be able to get more of what you need from the same place!
Stay tuned!! Coming to Gohbee in the near future, we will begin rolling out our line of electric powered helies!Be sure to keep an eye out for them!
Effective January 1, 2007 we will no longer be able to offer the 7% discount on orders using a field rep code. In place, we are excited to offer free ground shipping on orders totaling over $100 within the continental USA.
Thank you for your continued support over the last year and happy holidays from the staff at Gohbee!
Merry Christmas!