Blade CP servo's

[Detroit]

I am going to replace the stock servos on my CP with another set of stock ones I have off a parts heli I bought. It is also a CP. My question is, when I center the servos, then install the horns, do the horns come straight out at a 90 degree anglewhen centered? :arggg:

[BIGGAME121]

I am going to replace the stock servos on my CP with another set of stock ones I have off a parts heli I bought. It is also a CP. My question is, when I center the servos, then install the horns, do the horns come straight out at a 90 degree anglewhen centered? :arggg:

They should but those stock servos dont always center for a 90 degrees fit
if you are using a stock radio you cant adj them. You just have to adjust linkage to keep swash plate level.

[Detroit]

OK. Thanx that's what I wanted to know. As usual the vast knowledge of the people here comes through again. :noteworthy

[jediwannabe]

Since you don't have sub-trims (on the stock Tx). You can use the regular trims a little bit to TRY and get the servo arms a little more level before you adjust the links to level the swash. Mine won't go 90 in any position, but it helped a little.

[avatar71]

is it possible to use digitals on the cp? like the jrds285 or the futaba s3153. is there a point to such an upgrade?