PDA

View Full Version : Worley Parsons 2100mah and Swallow Advance Charger


markak
12-18-2006, 05:12 AM
Hi there

I have a Swallow Advance charger and recently purchased a Worley Parsons 2100maH battery with a balancer. the battery does not actualy have any info other than the Worley Parsons Sticker with info on battery safety about it on the pack but the guy at the store said it was 2100mah.

On the the charger i set it to 2100 and 11.2 V i think 11. something and the battery takes around 2130ma after around 75 minutes.

I also have a 1500mah some chinese battery i set that at the 1500 and also 11. something volts it takes around 1510ma it also takes around 75 monutes for a full charge.

the charger reports that the batterys have taken in a good charge and the flight times im getting out of them are fine. the charger also has a bunch of safety things built in like low input /ouput volatge etc...

Just wondering if these charge times of 75 minutes seems correct the guy at the store originaly told me +-30 minutes to charge.

Im still very new to this and appreciate any help or suggestions.

The batteries are used in HDX 450

regards

mark

z11355
12-18-2006, 07:20 AM
thats about right. these chargers (all Lipo/Lion) chargers taper voltage as they gothrough the cycle