View Full Version : I hear a bunch of Razors shipped today!!
WillJames
12-19-2006, 08:02 PM
Word on the street is a lot of Razors slashed through UPS trucks and shipped today. :)
Happy Christmas all you guys who had one on order!!
misskimo
12-19-2006, 10:01 PM
should be abunch of happy campers soon , they also shipped out yesterday too , YEH!!!
eheliflyer
12-19-2006, 10:56 PM
Dang you got yours fast. I live all the way over here in Cali. so I won't get mine till the day after Christmas. I can't wait. :D
OICU812
12-19-2006, 11:25 PM
I look forward to you guys trying a bunch of setups while I continue to build and finish other projects, save cash and then learn from all your mistakes :). lol j/k have fun, I will venture this bird later in the new year sometime. :hug:
Jeff Palmer
12-20-2006, 01:41 PM
Just received my razor kit today, Thanks to Ray at RHR.
#10270004
Bayou Talker
12-20-2006, 06:22 PM
What is the street price on these things?
NolanManley
12-20-2006, 08:16 PM
Those bastads! :shock: How many mad wives do ya think there are going to be due to guys building Razors this week. :WOW :dontknow
DebianDog
12-20-2006, 08:55 PM
Man I am jealous! :smokin:
teeroy
12-21-2006, 09:15 PM
Got my Razor on Wednesday :D but my wife told me I couldn't have it till Sunday because it is my Christmas present. :(
OICU812
12-21-2006, 11:44 PM
wife told me, ugh...... lol.
Aussieheliguy
12-22-2006, 08:38 AM
Wifey no longer about, Yeah. No problems
Vertflyer
12-23-2006, 06:57 AM
Where did most people order their razor from?
DavidH
12-23-2006, 08:39 AM
Hobby Dealers and also directly from MA.
David
r2160
12-24-2006, 09:06 PM
Hi all
We even have kits on their way to downunder!
They shipped on the 20th. Hopefully this week!!!
Glenn
Aussieheliguy
12-24-2006, 09:15 PM
Can't wait Glenn, got to have my Razor fix..........
eheliflyer
12-27-2006, 11:35 PM
Sweet I just got mine today. I can't wait to start the build. Thanks for your help Tony! :smokin:
OICU812
12-28-2006, 04:22 AM
Ok Alvin, it has been 24hrs, is it ready to Maiden yet?
eheliflyer
12-28-2006, 04:48 AM
Shawn you are a crack up :lol:. I just got it when I got off of work about 6:00 PM. If I didn't have to work tomorrow I would be up all night building her. I am still undecided on which cyclic servos I will install and the Motor? My gear ratio is 18-46:1 so either I have to use the Neu 1515-2y. I have the Jazz 55-10-32 and 2 FP Evo 5S 3700mah "NF" packs.
misskimo
12-28-2006, 04:49 AM
Yeh! no problem Alvin , Shawn , you should have got a Razor from the first batch ,
OICU812
12-28-2006, 05:02 AM
Ok I guess you need a little more time, lol. But seriously now....
9252,9350,9451 something like that Alvin, I wouldn't consider anything less than a 9252 rated servo due to direct connect to servo like the Razor is. Not a push/pull scenario like the Ion so you should run a beefier servo, all imho of course :)
eheliflyer
12-28-2006, 11:07 AM
I am stuck between the Airtronics 94758Z or the Futaba 9451. Also to any of the other owners or Factory Pilots, has anyone tried this motor?
"Z-Power Z50A-800 Outrunner (w/fan)
eTitan Conversion/e620SE/Logo 14/MA Razor/3D-MP
New "A" model with redesigned core. Very high torque and cool running.
Highly efficient, high powered brushless outrunner with integral fan. A great performer for any 600-620-bladed model, with a 10s LiPo or a 12s a123-M1 setup. Runs as strong as anything we've tried on 10s, but much cooler.
kV: 780; Io: 1.95A; Rm: 20 mOhm; wt: 348 gm; 5mm shaft."
I have the 18.46:1 gear ratio right now. If not I will just go ahead and get the Neu 1515-2Y.
Any and all comments are appreciated.
misskimo
12-28-2006, 11:20 AM
hey , tried a z50- 600 , drop in replacement for the actro 24-4, had a tad less power than the actro , but mine must have had a defect, after 7 mins , the motor got up to 300+ degree F , :WOW , the heat traved up the esc leads and cut that off , first unplanned auto , alot of fellows are have good luck it seams with this motor on 12s , not bad for a 109 dollar motor
eheliflyer
12-28-2006, 11:37 AM
Tony with my gear ratio will the 780KV motor be ok or is this gear ratio? I know it is for the Neu 1515-2y which is a higher KV motor but what I would really like to know is what is the lowest and highest KV motor that I can run on this ratio with 10S?
I would like to stay on 10S since I have a bunch of 5S packs.
misskimo
12-28-2006, 11:58 AM
1100 KV is what will be needed for good power , you cant run the Z50 800 unless you have a 12.5 to 13 to 1 gearing
misskimo
12-28-2006, 12:08 PM
hey , do like I did , bought an asortment of gears , 16 20 22 pinions , 32 36 and 38 secondary gears , that gave me alot of ratios for all kinds of motors to try, except the 1515 motor :( the ratios I have with the gears I got, 14.22 , 13.5 , 12, 11.4 10.8 , 10.3 , 9.7 , 9.6 and 8.7 to 1