PDA

View Full Version : Beastx on velocity 90 need some sugestions


xfactor6
09-15-2010, 08:17 PM
what would be the best way to hook up the beastx to a jr 921 receiver multigov pro ds610 servos 650 tail 620 throttle. What regulator should i buy and what voltages should I run the servos/ equipment at?

MaSt0RaS
09-17-2010, 04:02 AM
i think that the best reg for this situation is the reactor X or the gryphon!

raptorwoody
09-19-2010, 01:28 PM
I am running this regulator (http://www.experiencerc.com/store/prr-adjdns_adjustable_voltage_regulator_gyro-p-1508.html) on my Trex 700N with a 921 receiver and Align Governor with no issues. If you don't want to have the adjustability use this regulator (http://www.experiencerc.com/store/prr-6vdnsds_voltage_regulator_gyro_output-p-1507.html). In all practicality, you could just use a straight 6v regulator (http://www.experiencerc.com/store/prr-6vinl-_line_voltage_regulator_%3Cb%3E6v_version%3C/b%3E-p-3932.html). Since all your servos are good for 6 volts, it is a KISS setup!