idle up 1 & governor Questions

[Scamp62]

I tried (for the first time) to switch to idle up 1..”Oh my god” :shock: she dropped like a rock …switched back to norm and all was well ! :roll:
How do you set this up to ware it doesn’t drop?
And I have a TJpro governor on it…..well the TJPro continue to work in Idle up 1 & 2 ?

[BarracudaHockey]

You are hovering at 1/2 stick? 5 degrees pitch at mid stick, and then you flip to idle up in a hover and it goes to 0 at mid stick and +5 at 3/4 stick.

The simple solution is to set your top three points in your normal curve to 0, +5 and +9 or 10

Or switch to idle up in a climb out when the stick is already at 3/4

Yes your TJ will work any any flight mode except throttle hold.

[Rickenbacker]

The easy solution is to use the same pitch curves (-10/0/+10) in all modes, and make sure the normal throttle curve is the same as the idle up throttle curve from mid-stick and up. Also make sure your trims are the same in all modes. If the TJ Pro is controlled by a switch (I have a GV-1, controlled by throttle setting) make sure that switch is programmed the same in idle up, if possible.

Even in normal mode you should be hovering at 3/4 stick.