View Full Version : DX7 Gyro Gain%?
buburub
12-26-2006, 10:08 PM
Hi Guys,
I just got a DX7 and installed it into my Stratus. I'm running a Futaba GY611 Gyro. My previous gain was 37% on my Futaba 9C Super. What should the gain be on the DX7 to equal the previous setting.
Thanks in Advance,
Edmund
TMoore
12-27-2006, 01:24 AM
Why don't you just look on the 611 display and adjust the TX gain until it reads whatever you want it to read?
Slick
12-30-2006, 04:39 PM
Hi Guys,
I just got a DX7 and installed it into my Stratus. I'm running a Futaba GY611 Gyro. My previous gain was 37% on my Futaba 9C Super. What should the gain be on the DX7 to equal the previous setting.
Thanks in Advance,
Edmund
I might not understand the Futaba stuff, but I believe you need to be over 50% to go into HH. Hmm kind of guessing but maybe 50+18.5 so try 68% or 69%.
Not sure if this helps.
-Craig
heliroller
12-30-2006, 10:35 PM
Hi Guys,
I just got a DX7 and installed it into my Stratus. I'm running a Futaba GY611 Gyro. My previous gain was 37% on my Futaba 9C Super. What should the gain be on the DX7 to equal the previous setting.
Thanks in Advance,
Edmund
On my Trex600, in Aux2 atv setting is 50 which gives me roughly 37%. Yours may be slightly different. Verify with the gyro amp to be certain. That is in HH mode.