EVO50 head set-up

[xircom]

in the ARF set-up of the EVO50, and also checking all links according to the manual, with 50% collective pitch - the Seesaw and mixing-arms are not really horizontal. They both get horizontal only around 75% pitch, whereas the elevator/aileron levers are horizontal with 50% pitch. Is this correct ?

[Jafa]

It's setup for F3C - that's all - fine for learning on
When you start getting into 3D you may want to change it
so the wash out levers and the top bell levers
are level at 0 pitch and 50% stick

[xircom]

thanks, in this case nothing to change for me :wink: