blade cpp tail issues

[fox98racing]

OK guys I have been fighting this for several weeks now. It all started with the tail not holding. One day it was almost hands off, then the next it started to drift both ways. when you use the rudder stick to compensate it would way over compensate. I tried every adjustment you can on the gain and proportional pot on the 3n1, nothing helped. Then I replaced the tail motor, no help, then the main motor, no help. So finally I replaced the 3n1, and bought an e-flite G90 HH gyro. Now when you throttle up to take off, the tail motor starts running wide open, you give it left rudder, and the tail motor stops.(even when the stick comes back to center) When you get it off the ground you just can't hold the tail, which ever way the nose drifts full opposite rudder will not stop it. I have done my first piros now, not even trying to. I guess now I am trying to find a cheap dx6 setup, because i am thinking it might be the tx, or the reciever. Any help would be apprecitated.

Thnaks, and sorry for such a long post, I just have no idea what to do :arggg:

[carlo_the_wonder_frog]

Reverse the tail motor plug at the 3-in-1 and try it again. Possibly the rudder channel is reversed, but sounds like it works correctly because the tail motor stops at full left rudder like it should.