Can I use 710 and 105 mm blades on standard boom gasser?

[enam100]

Shall appreciate some advise. I have some extra, I was wondering whether I can use those, will i have a main and tail blades strike ?

[broncoholic7]

That is what I am using on mine.
V-Blades 710 mains, 105 tail with 95 paddles.

[DebianDog]

I think that is standard set of blades for a gasser

[enam100]

Just double checking one thing total blades length from tip to tip is 29.3" is that a 710 blades ??? Sorry if this impose a dumb question

[Whirly-Girl]

29.3 inches = 744.22 mm

[enam100]

Thanks

[DebianDog]

Does that include the head?

[enam100]

No from blade tip to tip. Actually right now I measured from bolt to tip its 28.5" approx so I think I have a 720 MM blades

[Bobs]

I just measured my stock tail blades and they are 105mm, tip to tip. My mains are 720 V-blades. These are the stock recommendations so you're fine. However, it seems everyone is running 95mm paddles. I'm running 85mm as per Chris' recommendation. What do you gain or lose by using 95mm paddles over 85s?