PDA

View Full Version : 6HV Battery Compatibility


Pages : 1 2 [3] 4 5 6 7 8

rotorWIZZ
01-12-2011, 02:38 AM
Maybe an idea to put the weight of all battery's in the first post of this topic?
Make's it easy to find and compare the right size and weight for your setup...
Turnigy NT 2650 25-50 weighs 380 gram including ec5 connector.
When i'm home from work i will check the Turnigy 2650 40c with ec5 connector.

rotorWIZZ
01-12-2011, 03:25 AM
Turnigy 2650 40c with ec5 connector weighs 477 gram.

discoferret
01-12-2011, 03:38 PM
Longmax Tipple 3000mah 20c fit the FB frame so they should also fit the FBL frame.

AnTi Taco
03-14-2011, 01:54 PM
Anyone try and see if the Volts 3700mah 6s packs fit on the 6HV?

Eric Brandenburg
03-15-2011, 04:36 PM
Pretty sure the canopy wouldn't fit over those, and even if it did it would be very nose heavy.

Elios000
03-20-2011, 02:20 AM
hmm thinking about a 6HV wonder if my 3200mAh packs will fit can some one give the size in numbers not just wnat packs fit?

TheBum
03-20-2011, 07:20 AM
hmm thinking about a 6HV wonder if my 3200mAh packs will fit can some one give the size in numbers not just wnat packs fit?

It's not that easy. A pack can be too long, too wide, too tall, or any combination of the three. In each case, the packs will press against the canopy in different ways. You could compare the dimensions of yours against the ones in the list and if it's the same size or smaller than one of them in all dimensions, it'll fit.

Elios000
03-20-2011, 08:01 AM
guess thats one way i know it has tons for room in my 500

kevinator9
04-06-2011, 06:10 PM
Anyone had any luck fitting Hyperion 3300mAh 35C packs?

Thanks

rcthai9898
04-09-2011, 12:04 PM
A123 15S

audio131
05-17-2011, 02:26 PM
all these packs listed fit with canopy?

TheBum
05-17-2011, 03:23 PM
all these packs listed fit with canopy?

Yes. That was the main criterion for being listed.

audio131
05-17-2011, 05:23 PM
so basically, there is not much room on the fbl 6hv to put electronics so for much of what i see the electronics are put pretty much in the same place from heli to heli.... What is the range of weight for 2 lipos total in grams to balance out the heli

belcom
05-17-2011, 05:42 PM
Voltz 3300mah 35C or Nano-tech 3300 25C are probably the best choices.

TheBum
05-17-2011, 05:52 PM
so basically, there is not much room on the fbl 6hv to put electronics so for much of what i see the electronics are put pretty much in the same place from heli to heli.... What is the range of weight for 2 lipos total in grams to balance out the heli

Somewhere in the range of 800-1000g, probably cheating more toward the top of that scale.

vinc77
05-17-2011, 09:49 PM
[QUOTE=Murator;2592154]hi guys
I'm the guy in the video, I have the atom 6hv and I have flown with Turnigy Battery 3000mAh to 3300mAh 40c 35c 30c 20c 30c and 25c 3700mah rhino, the rhino is the best, the center of gravity is pefect, weight is not noticeable and the bug has plenty of power, also took the microbeast, perfect, the canopy should be withdrawn slightly back holes.

Hi ,I try 25c 3700mah rhino on my 6hv n the CG is Super nose heavy !! How u manage to get the correct CG?? Pls advance. Thks:confused:

belcom
05-18-2011, 01:37 AM
Hi ,I try 25c 3700mah rhino on my 6hv n the CG is Super nose heavy !! How u manage to get the correct CG?? Pls advance. Thks:confused:

I also have a pair of these Rhinos and they fit and work fine. I still like the Nano-techs better though. CG seems ok but it's definitely not super nose heavy as you describe. Combined weight for both is 1180g.

vinc77
05-18-2011, 02:15 AM
May I know how u guy get the CG ? I always chk my heli CG with holding the main blade vertical n make sure the heli tail stay horizontal position. Is that correct ?? When I try put in the 3700mah Rhinos heli nose is on 6 o'clock position. Is that consider nose heavy ? Pls correct me if I'm wrong. Thks

TheBum
05-18-2011, 06:46 AM
May I know how u guy get the CG ? I always chk my heli CG with holding the main blade vertical n make sure the heli tail stay horizontal position. Is that correct ?? When I try put in the 3700mah Rhinos heli nose is on 6 o'clock position. Is that consider nose heavy ? Pls correct me if I'm wrong. Thks

Correct, as long as you either disengage the pinion from the main gear or you check it twice: once with the tail pointing left and once with it pointing right.

audio131
05-19-2011, 06:49 PM
will pack that are 118mm lx35mm w 55mm h fit with canopy on?

vinc77
05-21-2011, 09:49 PM
Correct, as long as you either disengage the pinion from the main gear or you check it twice: once with the tail pointing left and once with it pointing right.

Thks bro, to get perfect CG i did some mod on my heli. Get the rudder servo mount for T-REX 600( need to trim the Id a bit) shift tail servo to the aft. Bingo !!:clappp
Test flight on 3700mah Rhinos yesterday. Wow....nothing to say !!! POWER !!! :Bang
Thks for all the Infor guy !!:thumbup:

audio131
05-26-2011, 08:33 PM
hi, my 2 packs weighted in at 850g plus 6 ec5 connectors up front and the heli is tial heavy.

kevinator9
05-26-2011, 09:29 PM
I am getting some of the new Turnigy Nano-Tech 6S 3300mAh 45C packs (Just bought them today).
The Turnigy Nano-Tech 6S 3300mAh 25C fit no issues so hopefully the 45C should be no problem. Will let you all know.

Cullen Colapietro
05-26-2011, 10:44 PM
I just got a set of Spyder 3300 30C that weigh 538g a piece after a cell went bad on my Nanos @ 63 cycles. These new packs are physically quite a bit larger than my Punch 35C 3300s @ 490g. The packs barely fit under the canopy and the heli is nose heavy. This is all on the original style frames, so seems I need to mod my frames.

kevinator9
05-27-2011, 02:55 PM
I have had fair luck with my Turnigy (NON Nano-Tech) 3300mAh 30C and 2650mAh 30C packs. They have lasted over a year now, nearly almost two. Hopefully my good fortune will continue but if I have a bad batch of Nano-Techs, I will most probably get some Voltz packs.