L10 stretch need help with parts list and questions

[Cryofix]

First off is there a online shop that has everything including blades? if there is what do I need?

parts list I have so far is

02480 Boom (L14)
02483 Push rod
02444 belt

Do I need larger tail blades?
Are the plastic ones ok?
Is there anything missing from that list?
550 MM CF blades which ones should I get?

Just got done tonight with a custom wiring job on logo/askman360, got all my electrics installed, got the camera mounted on the camera and let me tell you its not easy and takes ALOT of work, however with this all said and done this baby looks heavy and I am still running woodies.


Thanks!

[AZ ChopperCam]

I get all my Logo stuff from Esprit Models ( www.espritmodel.com ) and when they are out of stock I get it from my hometown source for Logo parts, www.allerc.com

the belt I used was a 2766 and boom was 2759. I did a carbon pushrod with a boom mounted servo using part no. 828.

I fly TT550 carbons (wide chord) and 90mm tail blades. My stretched Logo 10 with Z30A-1100 on FP 5S 5000 packs has plenty of grunt to haul around my Raptor front mount and video camera for about 7 minutes.

If your running stock 500mm woodies you for sure want to consider a stretch or at least 515 carbons.

[oscillator]

I don't mean to hijak this thread, but along with the stretch parts, could someone list what spares one should keep for an AP Logo 10?

DJ - was the boom mounted servo to avoid a longer pushrod, did you need the space for electronics, or is there some other reason for going to the boom mount?

Thanks!

[AZ ChopperCam]

or is there some other reason for going to the boom mount?

CG issue. Since I am running a heavier mount and now doing video (heavier camera) I moved the servo aft to help get CG correct.

[Cryofix]

I am going to spare according to my Trex 450, Spindle, Main, Blades, Main gears, boom, etc...