reefguy
09-13-2004, 11:58 AM
i replaced the gyro in my freya to a new jr 5000t, and using a 9c tx, anyone has used this setup? my question is the white connector plug from the gyro unit gets plugged into channel 5 on the rx, and the black connector(aux3) not connected, my piro rate seems way slower on my left than the right, and in fast FF, the tag wags the gain setting while the wag was at 70 percent than dropped to 63 percent, but same wagging. could someone who has used this combo, offer some overview on the way the gyro is used. thanks,