PDA

View Full Version : PARKZONE TYPHOON


I.C.O.N.
01-07-2007, 03:26 PM
I just got mine but have yet to maiden it.

Do any other Helifreaks have one of these little babies.

I thinks it should be a lot of fun. Here are some vids of it in action.

http://media.putfile.com/Typhoon3D-Need-More-Elevator-Throw

http://media.putfile.com/Typhoon-3D-Takes-A-Beating-1-6-2007
http://media.putfile.com/Typhoon-Bashing-Windy-Day-1-6-2007

I have the plug and play model for a $159.

I put an Electron 6 in it and am going to use my Futaba 7C with some 2100 lipos that I have for my T-REX. I moved the Electron from my Rex too and bought a Berg7 for it.

Here is a link to whats in the box.

http://www.hobbyzone.com/rc_planes_parkzone_typhoon_pnp.htm

Anyone else flying one of these?

Have Fun!
Andy

big-al
01-07-2007, 08:11 PM
yes there are a few of us here that have them.

get some extra gear sets, a spare prop and lotsa batteries, lithium that is.

I.C.O.N.
01-07-2007, 09:48 PM
I have some extra props but the LHS didn't stock the gears. I'll have to order some. And some HS81's to replace the servos. I want to put them on 6V as well. But gotta get it in the air first.

I only have one TX batt, but three 2100's so I should be able to fly nonstop until the TX is pretty much dead.

I have the flaps mixed into the elevator to get more motion with less work for that servo. Hope the stock ones hold up for a few flights anyway.

Glad to see some freaks around with this plank.

Can't wait to maiden it!

big-al
01-07-2007, 11:11 PM
stock servos are fine. if they go bad then replace them with 81s.

wren1702
01-08-2007, 10:35 AM
After a couple of crashes due to bad servos I upgraded the ailerons and elevator to HS-81s.

I.C.O.N.
01-13-2007, 01:43 PM
I just got her out for the first time today!

She flies great!! :woohoo

I was in the air for only about 8 mins cuz it's soo cold. I could barely move my fingers so I tried to bring it down.

Missed the dirt road runway and tipped it into a fence. Dinged up the wing a little but not bad. it's drying now.

I really just ran out of air speed and it dropped before I got it lined up. I turned it into a real plank... ... :lol:

My low rates were way too low and the high rates were about perfect. Could use a little more though. I will wait till I get some 81's to crank up the rates though.

Have Fun!
Andy