Reflex and JR, novice question

[Ruud Westerhout]

Hi all,

I have Reflex and a PCM9Xii from JR.
All is working, but I would certainly like to set things up as realistic as possible.

1) Do I understand correctly that I should use two models, one for Reflex, with Swashplate as 1-Normal and another one for the Heli itself with the swashplate 3-servo 120 degrees (I am going to use a T-Rex 450SE).

2) What other differences should there be between the two models, except from the swashplate ?

3) I have no idea how governor works, somebody care to explain how I use it one Reflex, or is this impossible ?

4) What throttle and pitch curves should be installed in Reflex model to get it act like the real one. I am a novice so the only thing I'd like the bird to do for now is hovering.

Thanks,

Ruud

[BernieF]

All is working, but I would certainly like to set things up as realistic as possible.


Read the manual!

You can setup Reflex to do all the mixing for your or you can set it up to work with the mixing (and Expo etc.) of the TX.

For the former use a very basic setup with no mixers whatsoever (maybe a very plain airplane model) and do everything else within Reflex.

[Ruud Westerhout]

Hi BernieF,

thanks for your reaction,

Ruud