Razor tail/gyro set up

[busted blade]

can someone please furnish some info for me. im using the 611 gyro and would like some baseline settings. also what hole on the tr bellcrank and what distance for servo shaft centerline to ball link centerline. thank you

[H to the C]

outside hole on the bellcrank

[H to the C]

my 611 settings are as follows


gyro direction = rev
mode 3d
limit = 90 to the left and 94 to the right
rate 40%

rudder atv = 140 **** you may want to try 100% to start with*****

[busted blade]

thank you H to the C. would you mind giving me your center-center servo arm length?

[H to the C]

i used a horn that came with my 9351 and 9451 servos. It is about 18 mm from center of servo horn screwhole to the control ball.

you can use the large star horn that comes with 9252's also.

[busted blade]

thank you