View Full Version : Hatori O-ring
Anyone know where I can get replacement o-rings for the Hatori HB-18? The ones that came with the muffler seemed to be a bit oversized and ended up getting pinched when putting the muffler on. That led to them eventually just tearing, so I'm needing me a replacement.
By the way, would standard o-rings from a hardware store stand up to the temps on a muffler or will this need to be a special order?
-syn
DavidH
01-21-2007, 10:16 PM
I buy O rings from Industrial Supply. You can buy a bag of 10 Viton Orings for about $5. I bought a bag of 50 for less than $20 a few years ago.
#211 is the Oring you want. I buy the brownish orange ones that are 80-90 durometer.
Should be Industrial Supply or Motion Industries in your area.
David
You are a god. :) Motion Industries, if this is the same place, is about 3 buildings down from my office. I'll be stopping by first thing tomorrow.
In case anyone else out there is interested, www.allorings.com has these in stock as well. $9.38 for a bag of 25. That is a hell of a lot better than the 6 bucks the Hatori ones cost from anywhere else!
-syn
On second thought, try these guys... shipping was far less. www.smallparts.com
-syn
z11355
01-22-2007, 05:16 PM
make SURE you get the Viton rings, not Buna-N
the size is 211 in that cruddy brown color ;)
DavidH
01-22-2007, 07:11 PM
Those at small parts are 75 durometer. I prefer the 80-90 durometer. They last longer.
David
Got any tips on where to find the 80 - 90 durometer ones? So far I've had no luck locally, so if you know of an online dealer that would be great. ...I've got a thing for the internet. :)
-syn
z11355
01-22-2007, 08:02 PM
Mechanic's Bliss
Worcester, MA
or you could spend a minute w/ Google.
DavidH
01-23-2007, 09:58 AM
Got any tips on where to find the 80 - 90 durometer ones? So far I've had no luck locally,
Motion Industries, if this is the same place, is about 3 buildings down from my office. I'll be stopping by first thing tomorrow.
Select a State - Alabama Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Virginia Washington West Virginia Wisconsin Wyoming Puerto Rico
Or enter Zip/Postal Code:
MOTION INDUSTRIES
205 ABERDEEN DR
FLORENCE , SC 29501 -0000
Phone: (843) 395-0095
Fax: (843) 395-1375
MOTION INDUSTRIES
7 IDAHO STREET
GREENVILLE , SC 29605 -0000
Phone: (864) 288-7503
Fax: (864) 297-6366
MOTION INDUSTRIES
1001 BANKTON ROAD
HANAHAN , SC 29406 -0000
Phone: (843) 554-9090
Fax: (843) 554-0467
MOTION INDUSTRIES
111 CORPORATE DRIVE
SUITE C
SPARTANBURG , SC 29303 -0000
Phone: (864) 578-1470
Fax: (864) 578-8398
MOTION INDUSTRIES
2548 MORNINGSIDE DR
WEST COLUMBIA , SC 29169
Phone: (803) 796-1071
Fax: (803) 739-0927
I got mine from Motion Industries. Pick up phone and call and tell them you want
#211 Viton Orings 80-90 durometer. Tell the color is a brownish color. The 80-90 may be black now. I really don't know.
David
Hmm, when I called them before they kinda acted like I was crazy. I'll try again and be a little more specific. :)
-syn
They didn't have them, but pointed to people who do... on the way now! :)
Thanks again.
-syn