Bade CP Pro assembly guide

[DrtBikDave]

Does anybody have a Blade Cp Pro Assembly Guide? I have the diagram from the owners manual but don't have a guide on which way the servo cables plug into the receiver. I wrote down where the wires go but I neglected to write down which direction they plug in. Any help would be appreciated.

[wizard35]

DrtBikDave.

This is right from the Owner's Manual: Channel 1: RH rear "aileron" servo
Channel 2: Forward "elevator" servo
Channel 6: LH rear "pitch" servo

Hope this helps?

SEMPER FI!

[stikflyer]

I assume the pro is the same as the CP. If so the signal (white) wire is towards the front of the 3 in 1.

[carlo_the_wonder_frog]

If it doesn't work one way, flip it around the other way, the plugs are designed so that if it is wrong nothing bad will happen, it just won't work.