CX with a 9CHPS?

[tppjr]

Is it possible?

Thomas

[DebianDog]

Anything is possible. Easy no. The new CX2 come with an Spektrum 2.4GHz DSM technology

The old Blade CX is 72MHz FM so you would just have to figure out what feq it was on then fiddle with your radio to get it to work with it.

[carlo_the_wonder_frog]

Yeah it will work fine on the CX, but not the CX2.

[tppjr]

Yeah it will work fine on the CX, but not the CX2.

Thanks and yes I was refering to the CX not the CX2. Anyone have a starting point setup? And do you just need a short Futaba crystal like you do when using it with a CPP?

Thomas

[carlo_the_wonder_frog]

You can use the stock crystal that came with the heli transmitter, works just fine for me. Use single servo swash H-1, PPM transmission, most options will be inhibited ( Gyro, throttle cut, revo). Pretty easy to set up really. I always program a throttle hold for 0 throttle and assign to switch G. no pitch curves to program, throttle curves work fine for me at 0 25 50 75 100.

[tppjr]

You can use the stock crystal that came with the heli transmitter, works just fine for me. Use single servo swash H-1, PPM transmission, most options will be inhibited ( Gyro, throttle cut, revo). Pretty easy to set up really. I always program a throttle hold for 0 throttle and assign to switch G. no pitch curves to program, throttle curves work fine for me at 0 25 50 75 100.

So you swap the crystal from the stock CX tx into the 9chp? I thought the object was to have all your rx's with the same crystal as the tx. Does the CX take a short single conversion Futaba (black label) crystal?

As soon as I get this figured out I will try your settings on the CX.

Thanks for your help,

Thomas