Ball Cross Member HELP

[HeliBouncer]

Okay K50 owners and fliers, both of these items control the flybar deflection right? If both of them are tightened with the grub screw neither will oppose the movement of the other. If one goes up the other goes down does not happen there is no movement. Seems to me that only one needs to be tightened and if so when do you tighten it? I mean do you wait until your leveling the swash plate up toward the head then tighten or does it matter??

Thanks in advance :Fan

[BigVanVader]

Do you mean the "L" shaped flybar control arms?

[HeliBouncer]

Edited:
The part is the stabilizer control arm part number 02-537 on page 13.

Sorry for the incorrect info, was in a rush.

Thanks in advance

:roll:

[HeliBouncer]

Hope this helps with description

[HeliBouncer]

Okay, got a little excited while putting this together and finaly figured it out. I, for some unkown reason :oops: , was thinking the paddles would move in opposite directions during deflection. DUH...they move in the same direction up or down. I'll tighten both.