View Full Version : balancing
engineered
01-26-2007, 02:39 PM
need guide to balancing blade for walkera 22E.. and adjustment too.. TQ
BarracudaHockey
01-26-2007, 02:50 PM
Pick it up with your fingers by the flybar while the flybar is out to the side, it should be balanced to it hangs level or slightly nose down.
engineered
01-26-2007, 08:46 PM
any pic about balancing.. cant imaging how is it..
PaulW
01-27-2007, 06:14 AM
Err..
I think he means balancing the main blades, setting the pitch range and tracking not balancing/ getting the Cof G right on the Helicopter the helcopter.
I used to balance each blade along its lenghth untill both had their balance point at the same distance from the root. Then attach them to the head, off the helicopter, and using the fybar as the fulcrum attach tape around the lenghtwise balance point of the lighter blade untill the assembly was horizontal at rest. But maybe there is a better way these days!
As I am unfamiliar with the linkage set up on a Walkera 22E I cant help with the tracking/ pitch adjustment
Here's a page showing how to balance the blades.
http://www.myhelicopters.com/balance.htm
Here's a video on tracking.
http://video.helifreak.com/?subpath=finless/trex450&filename=tracking101.wmv
Here are some other setup videos.
http://www.moretraction.com/helis/setup%20videos.htm
slikrx
01-29-2007, 07:00 PM
Is here:
http://video.helifreak.com/?subpath=finless/trex450&filename=blade_balancing101.wmv