HDX300 Servo Linkages?

[Rhumba555]

Since there are no HDX300 forums I will post here. I am building a HDX300 from scratch and have watched all the vids from Finless (great job). But one thing that he didn't seem to cover is what type of linkages to use from the servos to the swash. (or maybe I didn't catch it) The stock Blade CP ball links are too small to fit the balls on the CNC head. (I have the "Blade" CNC head with the underslung flybar) and the stock linkages seem too short (very few threads engaged when all is done). Are all the ball links in this size of heli the same? Will Trex hardware work? And where do I get threaded rod the same as what screws into the ball links so I can make my own custom linkages? Thanks a bunch guys. (by the way, please don't tell me to forget this heli and get a Trex, I'm already into this heli too deep to abandon it now...IT WILL FLY DAMMIT!!!) :D

[carlo_the_wonder_frog]

You can buy the servo linkages seperately at helidirect.com.

[Rhumba555]

I looked there...they have the pitch control links (2 different lengths, 2 each) but no servo to swash links. If you find them please post the link. Thanks.

[PTFlyer]

http://www.cnchelicopter.com/servlet/the-449/linkage-collection-for-3dx300/Detail

[Rhumba555]

That'll do nicely, thanks a bunch!