14mz trim reverse?

[TomR]

How do i reverse the trims on 14mz? I have been on function and tried, but cant get it to reverse :arggg: ...

And btw: how do i get idleup1 and 2 different in trim setup... :dontknow

:)

cheers

[DavidH]

Go into the Function menu. There is three columns. The first column is the channel and the control function. The next column is what stick or switch controls that function. The last column is the trim functions. If your using a Mode 2 radio. Select the trim next to the throttle, change it to T3. Then go to the elevator and change the Trim to T2.
If your wanting to reverse them from what I describe above. T3 would be next to elevator, T2 would be next to Throttle. The vertical trims next to the sticks are T3 and T2. The horizonital trims under the sticks are T1 and T4.

David

[RCfan]

And to have separate trims, go into the Trim function screen, e.g. click on T3, and then change to each idle condition you want to use a separate trim and then click on Sepa./Comb. button so it changes to Sepa. Hit Yes to accept the change when asked. Go to the next condition and repeat.