PDA

View Full Version : Castle ICE settings for Aurora?


Rexdestroyer
02-10-2011, 01:03 PM
I've finished the build on my new E Aurora. All that I have left is to complete the settings for the Castle ICE 120 esc.

Would anyone be so kind as to share their esc settings here?

I'm also running the Scorpion 4035 500kv motor.

Thanks!

united737pilot
02-10-2011, 04:22 PM
Jason Bell just gave me these settings over on the Avant Forum: Scorpion 4035-500

With the newest V3.26, you should be able to spin 2000rpm without the "too fast for proper governing"

What pole count are you using in the set up menu for the governor? It should be 10, along with 10T pinion, 99T main, 500kv, and 12s setting.

I have always ran 8Khz on the motor, which can be found here. (http://www.scorpionsystem.com/catalog/motors/hk40/hk4035/HK-4035-500/)

I have been running a governor gain of around 14, and found that to work well.

Rexdestroyer
02-11-2011, 01:01 PM
Thank you! I'll give this a try.