A "pullsing" motor

[bcritch]

I just got my tre-x 450x all done for the most part, I have everything set up through blade angles. I started to do some ground turn to check my blade tracking and to see what needs to be played with, with the tail( to mechanically adjust anything before I do it on the radio) and about half way up on the collective the motor was pulsing alot, just trying to see what it is and what can I do to fix it. I have an Align 430L motor, and an Align 25G esc. Thank's to all who can help.

[vapochilled]

you got a fully charged battery? if you do, then check the ESC settings as you have prolly selected the wrong shutdown voltage

[bcritch]

Battery is charged and my setting's are 1-1, 2-2, 3-1,4-1, 5-2 on the ESC. I am going to play around with it a bit more now that the game is over, and see what I can come with.

[hueyman]

check the esc setting for the number of poles of the motor. I don't remember which one of the setings it is but my 400dh pulsed when i programmed it to the wrong setting. I think the manual refers to it as motor speed setting.