Raptor 50 Swash plate on Stinger 90???

[Makis]

Hy,


can i use the R50 Swashplate on my Stinger 90??? :shock:

[flyinfool]

Functionally it will work.
I am not sure if the ratios are the same between them, you will need to check that out or at least go thru the pitches and reset them after the install.

[Mosco]

You can run this swash plate on a stinger, I have run the titan 50 alum. swash on a stinger 90.

You however, can not do the oppisite. Due to how thick the swash is, you will limit your pitch range and binding will occour on a raptor 50 with a stinger swashplate.

If you are looking for more pitch, and better cyclic on a stinger, try this:
http://www.thehelishop.com/rc_heli_product/HP204.html

I have not used it, but am hearing about it.

[Makis]

It doesn´t work man...

pitch is ok.....but i have problems on cyclic nick and roll...

**** off.

[Makis]

Her eis my problem

[flyinfool]

As I said it will fit but you have to check out the cyclic.
No need to start cussing people out because a different brand part does not work correctly.

[Makis]

i said fu.....o.....to the problem!!! :oops:
NOT TO MOSCO!!!!
:shock:


SORRY!!!! i said it to my problem...!!!! i swear...!!!!

[Makis]

So:


IT WORKS NOW REA0LY GREAT!!!!
before:

http://www.gohbee.com/Merchant2/graphics/00000001/gbs90_alt1.jpg


and now
look here:

[flyinfool]

Have you flown it like that yet?
I am very curious to know if you like the difference that flipping the blade grips over makes.
I have thought of trying it but have not had a chance yet.

[Makis]

Hy Jeff,


the Heli fly´s now better then before.
when i give 100% Roll, the mixing arms now didn´t crash on the pitch arm...(before it was so...)

Now you can make what you want....there is no problem...!!!!

I´m very happy.... :mrgreen: :glasses2:

greatings from germany...

[Mosco]

did you have to reverse the pitch servo for this?

I had slight binding before on the washout, I just added a small washer to space out the mixing arms.

[Makis]

Yes Mosco...



you must reverse the Pitchservo...than ist works exactly as the Raptor 50....!!!


CU...

[Makis]

I want to sell the Gohbee Head complete and the Tail comlete.

With all gears and R50 aluminium swashplate!!!!

please send PM if you are interessted

[Makis]

I want to sell the Gohbee Head complete and the Tail comlete.

With all gears and R50 aluminium swashplate!!!!

please send PM if you are interessted