JR's equivalent to Futaba 9252 or 9255 servos

[xircom]

I like JR a lot, especially RX/TX. When it comes to servos, it seems to me futaba is ahead of performance/price, anyway do you have any best servo for a 50 sized eCCPM machine (EVO50) ? Means comparable to Futaba 9252 or 9255, means nice centering and around .15s/8Kg ?

[nando v. arnhem]

Hi Xircom,

There are several JR servos that are a good choice for your heli:

DS8311 is a bit slower (0.18) and is 9kg
DZ9000S is a really fast servo (0.08 and 8.2 kg) and Curtis uses this one also.
I'm using the DS8317 (0.15 and 5kg) and the DS8455 (0.1 and 6.5 kg) on my Vibe 90. This is a eCCPM model as well and they perform GREAT!

All these servos are really precize, a lot of F3C guys are using JR servos as well.
I believe Hiroki Ito is using the DS8301

Because you are flying a eCCPM heli, the servo doesnt need to have alot of torque.

I hope this helps
Nando

[xircom]

Thanks a lot, actually recently I went to the shop and saw the DS8715, which is 12Kg and 0.09, then I could not resist :wink: bought 3 of them ...