BLADE CX WANTS TO FLY IN REVERSE

[DCHEEZELOG]

I HAVE A BLADE CX W/ABOUT 50 OR60 FLIGHTS IT HAS HAD SEVERAL CRASHES. REPLACED INNER ,OUTER SHAFTS SEVERAL TIMES. HAS ALUMINUM SWASH, LOWER HEAD,UPPER HEAD ,BEARING HOLDER,HEAT SINK. HAS CF BOOM.I HAVE SOLVED MANY VIBRATIONS . BUT THIS TIME I HAVE NO IDEA. I HAVE REPLACED INNER & OUTER SHAFTS.BALANCED BLADES.
REPLACED FLY-BAR.STILL HAVE VIBRATION.(THAT'S NOT MY ISSUE THOUGH) . WHEN I FLY FORWARD THEN LET OFF THE STICK, INSTEAD OF COMING TO A HOVER MY CX WANTS TO FLY BACKWARDS. WHEN I AM FLYING BACKWARDS & LET OFF THE STICK IT WILL CONTINUE FLYING BACKWARDS TILL I STOP IT. I HAVE CHECKED SWASH-PLATE FOR BINDING. W/ NO PROBLEM FOUND. I DOUBLE CHECKED BATTERY POSITION FOR PROPER BALANCE. I'M THINKING THE NEW VIBRATION &
REVERSE FLIGHT MAY BE CONNECTED .ANY IDEAS WOULD BE APPRECIATED. THX

[Taffey]

It sounds like a servo binding or centering problem.

Try swapping your two servos and see what happens. If it still wants to fly in reverse, you know that the servos are not a factor. It it flies sideways, it's time to repair/replace the bad servo.

[DCHEEZELOG]

SOUNDS GOOD ILL TRY THAT TONIGHT THX

[DebianDog]

PLEASE find the CAPLOCK key.

Thanks.

[DCHEEZELOG]

Sorry about the caps .Work habit .Have to do everything in caps there. Iswiched servos. The problem changed from fore/aft movement to side to side .

Thanx for the help

[Taffey]

No problem. :wink:

[DebianDog]

Sorry about the caps .Work habit .Have to do everything in caps there

What you work on a mainframe? :lol: