7C Throttle Hold Advice

[miskin]

I'm just starting to practice auto's with my swift from shoulder hight which so far have been successful. I have throttle hold setup to perform as it should BUT i have to go through the whole startup process again after i flick out of throttle hold.
I'm running CC60 in high gov mode

I know i can program in some throttle (20-30%)to stop going through the startup again but i am unsure of what i have to program it the throttle hold screen. My screen looks like this (if it helps)

TH-HOLD >ON
POS>+- 0% <<<< do i adjust this one to + or - 20%
R-OF>INH
TR+- 0%

Thanks
Miskin

[mporlier]

I think you are using throttle cut not throttle hold. On my 7CHP, Cut is the B switch and Hold is the G switch.

[Motions]

He's using Hold.

Miskin, yes you increase the POS> (position) setting until the motor engages. This will be the throttle position when you click into hold. On electric it's not that great because it keeps quite a bit of head speed depending on the ESC your using, but at least the motor doesn't cut and force you to slow start again, especially for bail out.