Governor in Sceadu Evo 50

[Bristow]

Hi,

I am thinking of getting the new ATG Governer and would like to know a few things,

1) Does it make a difference on a 50 (Sceadu Evo) ?
2) Is it relatively easy to setup and adjust ?
3) Can it be set up with an AUX channel on the PCM9X ? (doesn't have GOV function) - which channel would it need to be adjusted through
4) Can I set 3 different headspeeds for normal, idle up1 and idle up2 without the GOV function on the transmitter ?
5) What does everyone think of it in general ???

Thanks

Stuart

[SteveL]

1) yes it makes Throttle Curves and Swash mixing a thing of the past.
2) If it is the same as other GOVs yes.
3) Usually uses CH 7
4) Yes
5) Have not tried that brand yet.

[Mike C]

1. Tweaking of the curves is no longer needed

2. Different from others in that it can Gov. or rev limit (rev limit is to use your curves but prevent over rev.)

3. Any open channel 7 should work

4. Yes it can be setup different for each condition - mode or the same across the board

5. In general Great little device. But not for the begenner for 2 reasons.

a. throttle curves should still be learned and understood by begenners.
b. Last thing a new guy needs is head speed to jump up at 1/4 stick,





If it fails or chunks a magnet :shock: it would be a good idea to have a usable curve.

Curves still needed :lol: