RC Booya QD mounts on V90

[Greg Alderman]

Hey Guys! Been meaning to post these pics for a while...these are RC Booya's "Trex 700" kit that they sell...with a little bit of work can be modified to fit the V90...

I just cut the V90 mounts off to proper length...then drilled a 3mm hole thought the entire V90 mount and put a long 3mm bolt in from the inside so the threads stuck out so the RC Booya standoffs could screw on...you might need to cut down longer 3mm bolts to get the proper length...but I love the results! Nothing like QD fittings!

http://i201.photobucket.com/albums/aa274/glalderman/2011-02-20_15-50-19_319.jpg
http://i201.photobucket.com/albums/aa274/glalderman/2011-02-20_15-50-37_96.jpg
http://i201.photobucket.com/albums/aa274/glalderman/2011-02-20_15-51-27_6.jpg
http://i201.photobucket.com/albums/aa274/glalderman/2011-02-20_15-51-11_310.jpg

[DominicD]

Jeeze Greg, your 90 looks as clean as mine SHAME ON YOU :P

[millerman]

looking good greg :thumbup:

[Jason_Adamo]

Who's heli is that really! Way to clean to be yours

[johnpotter82]

probably a winter project.

[Greg Alderman]

Who's heli is that really! Way to clean to be yours

Ha...very funny Jason...you know me...I like electric better than nitro...although...if I have to fly Nitro...I like the 90 the best...

Johnpotter82...naw...not a winter project...actually a Pre-Production release heli...It just doesn't get flown as much as my electrics...and when it does...I spend probably 30 minutes cleaning it...as it normally is on display at events and such...so needs to stay nice and clean...no one wants to see a grimy old Nitro mounted in a stand on display...The canopy is also just a display canopy...I don't fly that canopy...the CF in the windscreen actually is CF laid into the canopy when on the plug...and not a canopy that is in production.

[wonderd]

Beutiful work! I will tell my friend to try doing this on his v90.

[low.level.3d]

Hi,

very cool! I will do that too! Thanks for the pictures :thumbup::thumbup:

cyril