stratus flanged bearing

[Hassan]

In the stratus manual, It is shown that the head block comes preassembled. I'm looking for a flanged bearing in the head block where the flybar rod is inserted. Unfortunately, its t shown in the manual clearly since the head block is preassembled. I pointed at the bearing in the photo. Any help for the part number? Thank you.

[angelob]

Part # 0283 - M6x10x3 flanged bearing

[Hassan]

Thanks angelob, I appreciate ur help.

[G MAN]

Corrected.DOUG

[sorensen]

It's a 4mm not a 3mm,the flybar wont fit the 3mm hole in the bearing you listed.DOUG

angelob is right.
It's a M6x10x3 flanged bearing!
The inner diameter is is 6mm, the outer diameter is 10mm and the width is 3mm.

On the Stratus head the flybar is NOT mounted directly in the bearings but in the MA126-86 Stratus Flybar Control Arm Base.

[DavidH]

http://www.miniatureaircraftusa.com/Store/proddetail.asp?prod=0283



David