zipper79
02-15-2007, 01:25 PM
ANYBODY KNOW IF YOU CAN UPGRADE A V30 TO A 50?
Paul Hinz
02-16-2007, 12:33 PM
Yes, If you can find one KSJ made a conversion kit, but it has been discontinued for a while. It was part number KSJ1275.
The other way would be to use the JR parts below.
JRP960967 Main Rotor Yoke
JRP960968 Main Rotor Hub Aluminum
JRP960969 Phase Ring w/pin
KSJ502 Hard Dampers
KSJ654 or KSJ1383 Heavy Duty Spindle
KSJ453 Limited Slip Auto Hub
JRP960974 Engine Mount 50
JRP983012 Tail Boom
JRP983069 Tail Control Rod
JRP960293 Tail Rod Guide B Set
JRP983077 Tail Brace Set
JRP960190 Front Tail Pulley
JRP960187 Tail Belt Pulley
JRP960217 Tail Belt
If you can find a KSJ1275 Long Drive Belt Venture 50 Conversion you do not need the JR Tail Pulleys and Belt. The KSJ Conversion kit used the stock Venture 30 Clutch. I would also install Thrust Bearings for sure on the 50. If you want to convert the clutch also then you need the following parts.
JRP960971 Clutch Bell Assembly
JRP960972 Clutch
The Venture 50 also came with a KJS625 Header Tank. The 50 also came with the 30s 3D flybar and paddles installed.
Paul