nwmtech
03-19-2011, 07:17 PM
SOLD!!!
I purchased this heli used about 30 flights ago. I completely went through it and made sure everything was mechanically sound and up to par. All balls and links are new, fuel lines, OMI fuel magnet, clutch, liner, dampers were all replaced as well. I also installed the CF electronics tray at that time and the canopy. Heli is setup with an ADK conversion grips on an Align FBL headblock. I will be including the JR8717's that came in the heli. I am not sure of amount of flights on them but I had zero issues when I flew it. They do have a bit of slop in the gears. The Align gov sensor is still installed as well and I'm leaving the JR throttle servo in there. I went through and setup the mechanical linkage geometry and servo horns to be perfect for VBar and BeastX so you won't need to touch a thing there. There's a CF tail rod and Lynx boom clamp. It's not a show heli but is completely mechanically sound. I'll also include the stock electronics tray and an Outrage pipe. The only reason I'm getting rid of it is because I killed the motor that was in it and would rather put the money into an electric at this time. Price is for what's shown in the first four pics and nothing more. I do have a BLS251, Edge 713 FBL blades, and Align tail blades that I could include to make the heli more complete but cost will go up depending on what's wanted. Price is $575 shipped via Paypal only.
http://i15.photobucket.com/albums/a359/cruzmystar/Heli/IMG_1882.jpg
http://i15.photobucket.com/albums/a359/cruzmystar/Heli/IMG_1883.jpg
http://i15.photobucket.com/albums/a359/cruzmystar/Heli/IMG_1885.jpg
http://i15.photobucket.com/albums/a359/cruzmystar/Heli/IMG_1884.jpg
http://i15.photobucket.com/albums/a359/cruzmystar/Heli/IMG_1793.jpg
I purchased this heli used about 30 flights ago. I completely went through it and made sure everything was mechanically sound and up to par. All balls and links are new, fuel lines, OMI fuel magnet, clutch, liner, dampers were all replaced as well. I also installed the CF electronics tray at that time and the canopy. Heli is setup with an ADK conversion grips on an Align FBL headblock. I will be including the JR8717's that came in the heli. I am not sure of amount of flights on them but I had zero issues when I flew it. They do have a bit of slop in the gears. The Align gov sensor is still installed as well and I'm leaving the JR throttle servo in there. I went through and setup the mechanical linkage geometry and servo horns to be perfect for VBar and BeastX so you won't need to touch a thing there. There's a CF tail rod and Lynx boom clamp. It's not a show heli but is completely mechanically sound. I'll also include the stock electronics tray and an Outrage pipe. The only reason I'm getting rid of it is because I killed the motor that was in it and would rather put the money into an electric at this time. Price is for what's shown in the first four pics and nothing more. I do have a BLS251, Edge 713 FBL blades, and Align tail blades that I could include to make the heli more complete but cost will go up depending on what's wanted. Price is $575 shipped via Paypal only.
http://i15.photobucket.com/albums/a359/cruzmystar/Heli/IMG_1882.jpg
http://i15.photobucket.com/albums/a359/cruzmystar/Heli/IMG_1883.jpg
http://i15.photobucket.com/albums/a359/cruzmystar/Heli/IMG_1885.jpg
http://i15.photobucket.com/albums/a359/cruzmystar/Heli/IMG_1884.jpg
http://i15.photobucket.com/albums/a359/cruzmystar/Heli/IMG_1793.jpg