Expo ?

[scubas00755511]

Do I want positive or negative expo on my 9303heli tx. I had a Hi-tec piece of shi#, and it was negative for expo. Im a beginer at 3D, but learning quick. :?:

[DavidH]

Positive makes it more softer around center
Negative makes it more aggressive around center.

That is JR above.
Futaba and some others are opposite from above.

David

[scubas00755511]

Thanks, Im rocken inverted flight, flips and rolls, worken on tic toc. Do i want it softer or aggressive at first?

[Peter]

softer ... +20 on cyclics is " normal " .....

[BarracudaHockey]

Its not going to blow up, try different settings and see what works best for you.

[scubas00755511]

Thanks guys ill start at+20 and try a few settings to see what I like. :lolol

[BarracudaHockey]

You have to understand (well you dont HAVE to but it helps) that a round servo output causes the end result to move farther during the center of its rotation than it does at the extremes so you already have positive expo (jr speak) built in with a round servo output. About 20 percent expo gives you linear movement at the control surface, any more will give you a softer feel at center than at the end of stick travel and less will give you more throw around center and less at the extremes.

[scubas00755511]

Thank you Mr Hockey, that helps me understand. :smokin: