lipo's dont wanna fit the batterys tray !!!

[whattheheli]

Just trying to get some ideas on what to do with my lipo issue ?? take a look at the pics and if anyone had anything that might help it would be great !!!

[kingman_14]

put it in the back of the motor :D :badair:

[Dennisu]

whattheheli

Mine fit just like that and work just fine. Thinder Power 2100 3Cell

Dennis

[Gizmo6035]

You can make a tray extension to help support the battery, I used carbon fiber but fiberglass would work just as well and be cheaper. You could get a fair sized peice from the project section of Radio Shack and cut it to fit.

[fedex]

Won't look as good but you can mount the battery under the frame, I used velcro, and a rubberband up front. The battery is more unprotected as well, but it works, and it got me in the air.

[Kushal_22]

More than one person Must have done this Mod. I too am looking for some Ideas as to what to use for a Tray or Tray extension.

Regards
Malcom

[racerman27410]

More than one person Must have done this Mod. I too am looking for some Ideas as to what to use for a Tray or Tray extension.

Regards
Malcom


I used a piece of plexi as a battery tray ...its easy to cut but very tough to break.... and if it does break you will have enough off a small piece to make many more battery trays.

Just play around with position....drill some holes and zip tie the thing on. add a piece of velcro and you are ready to rock n roll.

Frank