4 Servo Skyfox

[malc1]

Hi

I`m planning on using the four servo setup on the swash on my SkyFox mechanics.
Are we looking at using a Y lead somewhere on one of the R/c channels as obviously there is only aileron,elevator and pitch on the receiver?
Swash mixing is obviously to be set for 4 servo use on the TX.

[WayneBrown]

Newer radios have a swash setup menu for the 4 servo swash already in them.
What radio are you using?

[malc1]

I`ve got a JR 3810 which has the four servo swash mixing in the swash menu.
I`m just wondering how to connect the four servos for the swash plate into the three available channel positions on the receiver.
Might be a simple answer but :dontknow

[vario]

The second elevator servo plugs into Aux 2 on the receiver.
Joe

[malc1]

Thanks Joe :)

[Hrob2Ate]

The second elevator servo plugs into Aux 2 on the receiver.
Joe

so where do i plug the second aleron servo? I'm using an Airtronics RD8000 TX.