Separate timer settings for different conditions

[jmb2232]

I need some help from a 12Z guru. :noteworthy I set Timer 1 to be activated/deactivated by the J3 stick. Timer on is about half stick timer off is bottom stick. The problem with this setup that I didn't think about was that when I am in idleup 1or2 at full negative pitch the timer goes off. I tried to figure out a way to set the timer in Normal condition only, but had no success. Any change I make is made in all conditions. :arggg: Has anyone been able to just set timer parameters in Normal mode? Thanks for the help.
Mike B.

[jmb2232]

Well, I guess the "quick fix" is to not set an off position and stop the timer manually when I land. :idea: This would work if nothing else surfaces. :dontknow

[Fox222]

To bad you can't use a 2 input logic (and, or, ex-or) like can be done with condition select.
I just set mine to come on just above idle. I want be holding it at -12 for long enough time to worry about.