Schuster_Helis
02-24-2007, 03:59 PM
Hello, I am trying to set up a blade cp for a buddy with a DX7. Could someone post a diagram on how to wire this with no mixer. I am just using 2 speed controls. Any help is greatly appreciated.
Thanks,
ropes00
02-24-2007, 05:35 PM
Hi Jim,
There's a really decent illustration for using a no mixer setup on helihobby.com...
on the side menu open the informational option and select tips and tricks...about 2/3 down the page is the article on going separates. It was written for fp helis but control servos are control servos and won't affect what you need to do for the speed controls.
Let us know if you need any other help.