View Full Version : Wire tuck
scientist
04-12-2011, 12:08 PM
Guys please share photos/pics of your Rave wire tuck. I need to know how neat your can go.
tia,
CF_Machete
04-12-2011, 08:19 PM
my rave's guts are on the table as I'm installing a total g, but under the battery tray and under the base plate work well for me.
scientist
04-12-2011, 10:07 PM
how about your servo wire's?
pete914
04-13-2011, 08:55 AM
http://i35.photobucket.com/albums/d189/pba110/photo-11.jpg
http://i35.photobucket.com/albums/d189/pba110/photo-10.jpg
http://i35.photobucket.com/albums/d189/pba110/photo-12.jpg
scientist
04-13-2011, 12:20 PM
Nice wire tuck pete, I'm wondering how i can do mine,since im using external receiver with my Total G.DMSS TX/RX is not supported by TG,instead it'll use as external receiver setup.With that, mine looks like splash by spaghetti. Anyway if i have an extra fund i'll buy another DMS2 TX.
Lunchbox
04-13-2011, 03:42 PM
I can if I take all the electronics out.
helienv
04-13-2011, 04:50 PM
mines great, the blue tape was to protect the wire so i could get the zip tie nice and tight.
helienv
04-13-2011, 04:52 PM
also i would go with a DX8 or 7 or any of them, it just makes set up so simple
scientist
04-13-2011, 08:03 PM
indeed bro, i take that way,i don't love the external setup for my TG. And it helps to make my Rave clean.
pete914
04-13-2011, 10:43 PM
I'm using an external rx in those photos, Spektrum 6110 i think the servo plugs make a 90 degree angle with the rx body, that helps make things fit. It tucks nicely between the frame, tucked the gyro and servo wires (none were cut) between the frame support and battery tray. For repairs Pop two screws off the battery tray and you can easily access all your wiring, plus it's caged in and protected from the main gear etc.
Shred the rad
integy2
04-14-2011, 09:53 AM
Mini V with 6110E
ola.c
04-15-2011, 06:31 AM
R6203SB between the ESC and the MiniV
scientist
04-16-2011, 09:09 AM
Guy's do i keep a 3cm away my Total G from ESC? I heard from others that it will help to avoid interference?
Just wonder'n why you guys place your ESC at the bottom of your Gyro.
ola.c
04-18-2011, 06:30 AM
Just wonder'n why you guys place your ESC at the bottom of your Gyro.
It's because of the COG. If I have the ESC in the front I have to ad 10g on the tail. Works very god this way, no issues.
scientist
04-28-2011, 10:16 AM
@ola.c
Ohh but you didn't get any interference issue?since you place it near your gyro?
btw i'll post mine soon..
ola.c
04-28-2011, 03:08 PM
@ola.c
Ohh but you didn't get any interference issue?since you place it near your gyro?
btw i'll post mine soon..
Nope works like a charm. Actually I know several with same setup/placement and it works good for them too.