CCPM kit and 9Z radio

[Racer38]

Does anyone know how to set up a 9Z radio with the CCPM Raptor upgrade ??

I set mine up using the SR-3 Swashplate but I always end up with one control reversed, ie the cyclic will work correctly and my pitch will be reversed or just the opposite the cyclic (aileron & elev) will be backwards and the pitch will be correct.

I have been up all night trying to figure this thing out but I'm lost !!


HHHHEEEEEELLLLLLPPPPPP!!!!!!!


Thanks Craig :?: :?:

[ScotY]

Hi Craig,

I don't have a 9Z so can't help with actual settings. I can take a few guesses though...have you tried reversing the values in the swash menu? In other words, if it's +60, have you tried -60 for the control that's going backwards?

[Racer38]

I finally figured it out, in the SWH menu aileron, elevator and pitch are listed with rates that are adjustable from -100 to +100 defaulkt is +50 on all. I just set the pitch to -50 and it works now. Actually I had to go to like -64 to get my full pitch range.

CCPM is wonderful, much easier to setup (when you know the radio) and it removes lots of moving control parts!

Thanks for the reply

Craig

[JettaTDI2001]

see post in the futaba section

Joe