busted blade
02-26-2007, 09:45 PM
something i noticed on my 14 in my electric heli that wasnt initially obvious. i had a 9C before this and when i set up the throttle i set the trim to the lowest position. i set my 14 up the same way.i use a straight line throttle curve in idle up in governor mode. i had the blades off my bird recently and noticed when i moved the throttle stick through its travel with the head up at speed in idle up that the motor speed changed. after chasing a couple other things i went to the servo monitor screen and sure enough the virtual servo was moving. ive been flying this way for a long time. now that ive moved the trim to the center and tweeked my end point my heli has noticeably better performance. just wanted to pass this along in case someone else set theirs up the same way i did